Single Helix Breaker Machine

The working principle of the Single Helix Breaker Machine is that when the main shaft rotates at low speed, multiple groups of moving knife and fixed knife will repeatedly chop up the material, while producing high strength pressure to the discharge end; In this way, the material is pushed by high pressure, continuously rolling and grinding in the body, and then extruded from the long hole at the end of the body, so as to obtain the ideal size of the material

• Continuous production, easy to automate.
• Easy to use, improve noise and dust problems.
• The materials used in the equipment are strong and reliable.

CATEGORY: Plastic Crusher Machine

TAGS: Helix Breaker Machine, Plastic Crusher, Recycling Machine, Single Helix Breaking Crushing Cleaning Machine, single helix crushing cleaning machine

DESCRIPTION

---

---

The new spiral crusher is a multifunctional crusher with wide applications, high output, long life, significant effect, low-speed crushing and adjustable discharge port. It is suitable for materials such as plastic film and rubber. For example, ton bags, plastic bags, nylon cloth, non-woven fabrics, polyester cloth, car interior scraps, EVA sole scraps, old clothes, dustproof cloth, sunshade net, plastic cloth, composite film, winding film, car inner tube, latex products, tires, water rings, soles, washers, rubber factory waste, sealing sheets, conveyor belts, etc.

Principle

The machine is composed of a moving knife mounted on the main shaft and a fixed knife mounted on the body. When the spindle rotates at low speed, multiple groups of moving knives and fixed knives will repeatedly chop up the material, while producing high-strength pressure to the discharge end; In this way, the material under high pressure, constantly rolling and grinding in the body, and then extruded from the long hole at the end of the body, and the scraper installed at the end will be chopped again, to get the ideal size of the material, the end of the outlet several long hole, can adjust the size of the outlet, to obtain different sizes of the material particle size.

• The first level of the shredding tool is composed of a spiral moving knife and a fixed knife, and the material is first hooked into the body by a passive knife.
• The second level of shear hooks into the body, moving knife and fixed knife to cut the material, and the spiral advances, after hundreds of shearing.
• The grinding groove is arranged on the inner wall of the third-level grinding cylinder. The material is ground into finer particles by the outer circle of the moving knife and the cylinder.
• At the fourth level, the scraper is set at the discharge port to push the material to the discharge port for scraping again.

Features

1. Continuous production: There is no need for intermittent feeding and unloading, and the working capacity of the equipment can be fully utilized so that the production capacity of the unit machine can be improved, which greatly improves productivity.
2. Low-speed operation: The equipment operates at low speed, less than 60 RPM, has low noise, and has less equipment shock and vibration, which can extend the service life of the equipment and create a comfortable working environment.
3. Reverse device: When the feed is too fast, the current is too high, causing an automatic stop, through the button can control the equipment in reverse, and clear the blocking machine material.
4. Output size adjustment: After improvement, at present, only two bolts can be adjusted to adjust the outlet size of our screw mill. Adjust the thickness of the material.

Product specifications

Note: 1. Capacity May Vary with Different Materials and Feed Sizes.
2. The technical parameters above are not binding, we reserve the right to adjust according to the actual need.